Your Barrel – Your Choice
Create your very own profiling machine for bassoon.
By choosing the barrel that best suits your needs, you can define the profile of your profiled cane.
You can choose between an eccentric or concentric profile.
The eccentric barrel for bassoon has a change in thickness from the center to the outside edge of the barrel of about 0.30 mm, whereas the concentric barrel maintains a constant thickness from center to edge.
In addition to our standard barrels there are three other variants, each with a more defined spine in the middle of the blade.
Spine + is 0.26 mm thicker at the spine
Spine ++ is 0.48 mm thicker at the spine
Spine +++ is 0.55 mm thicker at the spine
-
-
The length stop integrated into the barrel makes it even easier to position the cane.
The position of the length stop is variable so that you can adjust it to different cane lengths.
-
-
For profiles with a more pronounced spine, there are special barrels with beveled pins.
You can choose between three variants in addition to our standard one to get your favorite result.
-
-
You can create a complete exchange set for your barrel. The clamp rings and the rotating handle are not included in the scope of delivery of the single barrel.
You can get the clamp rings as well as the rotating handle separately as accessories.
Please note that the clamp rings for bassoon and contrabassoon have different sizes.
- What’s in the Box
- Clamp rings and rotating handle are NOT included, but can be purchased separately.
- Manufacturer
- Reeds 'n Stuff