Easy and Efficient
The tip profiling machine is the most efficient machine
for creating the profile in the front half of the reed.
This machine allows you to precisely produce a symmetrical and playable reed,
using our many available templates.
Built of high-quality anodized aluminum and a special german steel,
the tip profiling machine is built to last for many years.
Linear ball bearings provide a comfortable user experience.
-
-
After years of development, Reeds 'n Stuff is proud to offer the Blade 360°. When the blade becomes dull simply rotate to the next sharp section and continue profiling. This can be done at least 6 times, providing reeds and reeds of profiling before a replacement blade is needed. The screw holding the blade is easily accessed from the underside, meaning once the height of the blade holder is set, you can set it and forget it. Simply loosen the screw, rotate the blade, and re-tighten the screw. Within seconds you can continue profiling reeds, rather than having to replace the entire blade.
-
Prepared for Transport
Prepare your tip profiler for transport.
Insert the mandrel into the designated hole on the left side, screw the wooden handle into the threaded hole on the right side, and lock the carriage into place with the transport locking screw on the left side of the machine.
Transport Bag Included
The Reeds 'n Stuff transport case features a simple design that's easy to use.
The foam interior allows for safe transport and provides a snug fit. The tools to adjust the machine can be stored in the zipper compartment on top of the case. The handle provides portability wherever you need it.
Test a Template
You can also test a template for 60 days.
- Weight
- 1440 g