Spare Blades
New

Spare Blade
for Blade 360°

New

Spare Blade
for Blade 360°

10 pieces in stock
Need a moment?
Keep all your selections by saving this item to your wish list, then come back anytime and pick up right where you left off.
Do you have questions about this product or need help ordering it?
Send us a message or call us at +49 37342 14 09 09.

A Revolution into the Future

After years of development, Reeds 'n Stuff is proud to offer the Blade 360°. When the blade becomes dull simply rotate to the next sharp section and continue profiling. This can be done at least 6 times, providing reeds and reeds of profiling before a replacement blade is needed.

The screw holding the blade is easily accessed from the underside, meaning once the height of the blade holder is set, you can set it and forget it. Simply loosen the screw, rotate the blade, and re-tighten the screw. Within seconds you can continue profiling reeds, rather than having to replace the entire blade.

    Note: be sure not to over-tighten the screw holding the blade. Due to its small size it is possible to damage the screw and/or screwdriver in this manner.

    FAQ 360° Blade

    Manufacturer
    Country of origin
    Germany
    Product number
    1103-000251103-00025
    This product is not to be used by children and persons
    with limited physical, sensory or mental abilities.
    There is a risk of injury if used improperly.
    This product is intended to be used indoors.

    Matching Products

    Recommended