A Revolution into the Future
After years of development, Reeds 'n Stuff is proud to offer the Blade 360°. When the blade becomes dull simply rotate to the next sharp section and continue profiling. This can be done at least 6 times, providing reeds and reeds of profiling before a replacement blade is needed.
The screw holding the blade is easily accessed from the underside, meaning once the height of the blade holder is set, you can set it and forget it. Simply loosen the screw, rotate the blade, and re-tighten the screw. Within seconds you can continue profiling reeds, rather than having to replace the entire blade.
Note: be sure not to over-tighten the screw holding the blade. Due to its small size it is possible to damage the screw and/or screwdriver in this manner.
FAQ 360° Blade
ブレード360°は少なくとも6つのポジションで使用できます。非常に慎重で正確な方は、より小さな回転数で、より多くのポジションを使用できる可能性があります。
ブレードホルダーを購入するのは一度だけです。その後は新しい スペアブレード ホルダーは再利用できるので、購入する必要はない。
The Blade 360° with blade holder is delivered with several extra screws and the necessary screwdriver to adjust, rotate, and replace the blades. It is also possible to purchase a service set that includes extra screws and a replacement screwdriver.
ブレード360°は、オーボエ・プロファイリングマシンおよびファゴット・チップ・プロファイリングマシンのブレードを交換するために設計されています。オーボエ・プロファイリングマシン、ファゴット・チップ・プロファイリングマシンのブレードがカーブしている場合は、ブレード360°が適合します。
- メーカー
- Reeds 'n Stuff
- 生産国
- ドイツ
- 型番
- 1103-000241103-00024