正確で客感的
リードの品質は色々な要素で異なります。
リード材の品質で大きく左右されます。
見た目だけでは判断できません。
リード材の内側が肝心です。
硬度計が客感的な数値を測定出来ます。。
リードのレベルアップと時間の節約につながります。
硬度計はアナログとデジタルから選べます。
精度は同じく、使い勝手に関してはデジタルがより簡単です
The Arbours A and B are for Clarinet and Saxophone.
With type A you will measure at the vamp, whereas type B is for measuring
at the flat inside of the reed.
First of all, the time saved in selecting suitable canes for you offers a great advantage. You save valuable working time that you would otherwise spend gouging, shaping, tying on and scraping canes that would not have given you a suitable result anyway. More important, however, is the fact that you can increase the quality of your reed making and get more reliable results.
Should the cane be measured dry or soaked?It should be noted that only sufficiently dried cane will give useful results. It is not advisable to use soaked cane. It is best to note the test results on the cane and later on the staple. This will give you an overview of what works well for you personally.
In what stage should the cane be measured for hardness?It is best to use the hardness tester after pregouging if you have a pregouging machine. The basic requirement is a smooth surface and a consistent thickness. If you use the small pregouger instead of a machine, you should test the cane after gouging.
Are the measuring results for pregouged cane the same as for gouged cane?If the material is thicker, the measurement results will be higher.
What are the usual measuring results?Usually we get readings from seven hundredths (hard) to almost 40 hundredths (soft).
Are there different measurement results for the hardness testers?Yes, as there is no standard scale and the factory tolerance of the dial indicator is 2 hundredths, it is possible that the hardness testers show different results.
Is there a difference between the hardness tester for oboe, bassoon, clarinet and bagpipe?Yes, the hardness testers have each been set up for a specific instrument. The heights of the support plate differ. The so-called arbour, on which the cane lies, is available individually, allowing you to convert your machine for other instruments.
Can the hardness tester be used as a dial indicator?The support plate of the hardness tester is too large to obtain precise results. The thickness of finished reeds, for example, cannot be measured in any case. Also with gouged cane inaccurate measurement results may occur. For this reasons we do not recommend to double the hardness tester as a dial indicator.
What is the difference between the analog and digital hardness tester? Which one is more accurate?Both differ only in the convenience of the reading. With the digital hardness tester, the zero position can be reached by pressing a button. With the analogue hardness tester, the dial has to be turned. The precision of both devices is the same. If required, you can connect the digital hardness tester to your computer to create personal statistics.
- メーカー
- Reeds 'n Stuff
誤った使い方をすると、怪我をする恐れがあります。
本製品は密室での使用を目的としています。