硬度計　デジタル
ファゴット用

583,10 €

この商品は在庫切れの為少々お待ちいただきます

配送時間: ca. 20 日間

ご検討中ですか？
後で購入する

この商品に質問がありますか？
ｍail.

正確で客感的

リードの品質は色々な要素で異なります。

リード材の品質で大きく左右されます。
見た目だけでは判断できません。

リード材の内側が肝心です。
硬度計が客感的な数値を測定出来ます。。

リードのレベルアップと時間の節約につながります。

硬度計はアナログとデジタルから選べます。
精度は同じく、使い勝手に関してはデジタルがより簡単です

- この持ち運び用バックに収納すれば
  精密な硬度計も安全に
  持ち運ぶことができます。
  サイドのチャックを開ければ
  必要な道具も収納することができます。
  購入

Why is the hardness tester so important?

First of all, the time saved in selecting suitable canes for you offers a great advantage. You save valuable working time that you would otherwise spend gouging, shaping, tying on and scraping canes that would not have given you a suitable result anyway. More important, however, is the fact that you can increase the quality of your reed making and get more reliable results.

Should the cane be measured dry or soaked?

It should be noted that only sufficiently dried cane will give useful results. It is not advisable to use soaked cane. It is best to note the test results on the cane and later on the staple. This will give you an overview of what works well for you personally.

In what stage should the cane be measured for hardness?

It is best to use the hardness tester after pregouging if you have a pregouging machine. The basic requirement is a smooth surface and a consistent thickness. If you use the small pregouger instead of a machine, you should test the cane after gouging.

Are the measuring results for pregouged cane the same as for gouged cane?

If the material is thicker, the measurement results will be higher.

What are the usual measuring results?

Usually we get readings from seven hundredths (hard) to almost 40 hundredths (soft).

Are there different measurement results for the hardness testers?

Yes, as there is no standard scale and the factory tolerance of the dial indicator is 2 hundredths, it is possible that the hardness testers show different results.

Is there a difference between the hardness tester for oboe, bassoon, clarinet and bagpipe?

Yes, the hardness testers have each been set up for a specific instrument. The heights of the support plate differ. The so-called arbour, on which the cane lies, is available individually, allowing you to convert your machine for other instruments.

Can the hardness tester be used as a dial indicator?

The support plate of the hardness tester is too large to obtain precise results. The thickness of finished reeds, for example, cannot be measured in any case. Also with gouged cane inaccurate measurement results may occur. For this reasons we do not recommend to double the hardness tester as a dial indicator.

What is the difference between the analog and digital hardness tester? Which one is more accurate?

Both differ only in the convenience of the reading. With the digital hardness tester, the zero position can be reached by pressing a button. With the analogue hardness tester, the dial has to be turned. The precision of both devices is the same. If required, you can connect the digital hardness tester to your computer to create personal statistics.

The digital dial shows a number and SET blinks. The number shown does not change even if I move the axle up or down.

Please keep ZERO pressed for 3 seconds. This erases the SET memory.

When do I have to change the battery?

The battery must be changed when the display flashes, the battery symbol appears, or nothing is displayed. The battery indicates the type used (e.g. LR 44).

How do I change the battery?

Do not touch the new battery with your fingers, use a piece of cloth. The battery compartment is located on the upper left side of the dial gauge. Use a small screwdriver or the tip of a sharp knife to lift off the small plastic cover. Insert the new battery exactly as you found the old one. When inserting the new battery be careful not to touch, bend, or break the battery contacts (the small pieces of metal inside the dial gauge).
You can find detailed instructions here.

バッテリー: LR44
メーカー: Reeds 'n Stuff
生産国: ドイツ
型番: F21-14000F21-14000

この製品は、身体的、感覚的、または精神的な能力が低下している人（子供を含む）が使用しないでください。
誤った使い方をすると、怪我をする恐れがあります。
本製品は密室での使用を目的としています。

適合アクセサリー

持ち運び用バック硬度計用

74,65 €

エルゴノミックベースプレート硬度計用

46,41 €

測定台硬度計用

68,43 €

柔軟テスターファゴット用

1.057,91 €

硬度計　デジタル
ファゴット用

硬度計　デジタル
ファゴット用

正確で客感的

FAQ

仕様

安全情報

レビュー

適合アクセサリー

硬度計 デジタル ファゴット用

硬度計 デジタル ファゴット用

正確で客感的

FAQ

仕様

安全情報

レビュー

適合アクセサリー

硬度計　デジタル
ファゴット用

硬度計　デジタル
ファゴット用